ACE RD 16W
Interchangeable with Atlas Copco BBD 16W / RH 16W
A 28.5 kg jackleg drill with a 2,340 bpm blow rate. Pairs with the ACE 51K pusher leg.
- Weight
- 28.5 kg
- Blows / min
- 2340
- Air use
- 69 l/s
- Air pressure
- 6 bar
ACE jackleg drills are water flushed rock drills for drifts and tunnels underground. The range runs from the 22 kg RD 656 4W, which takes the same parts as the Atlas Copco RH 656 4W, to the 35 kg S 250.
They deliver 2,000 to 2,650 blows per minute for 27 to 41 mm holes, and each one is matched to an ACE pusher leg for one person drilling.
Interchangeable with Atlas Copco BBD 16W / RH 16W
A 28.5 kg jackleg drill with a 2,340 bpm blow rate. Pairs with the ACE 51K pusher leg.
The RD 330 set up as a jackleg drill for 27 to 41 mm holes up to 6 m.
Interchangeable with Atlas Copco RH 656 4W
A 22 kg jackleg drill built to the Atlas Copco RH 656 pattern. Pairs with the ACE 62K pusher leg.
Interchangeable with Seco S25
A 31 kg jackleg drill built to the Seco S25 pattern, for narrow veins and low stopes.
Interchangeable with Seco S215
A 25.5 kg jackleg drill for narrow veins and low stopes, built to the Seco S215 pattern.
Interchangeable with Seco S250
A 35.2 kg jackleg drill built to the Seco S 250 pattern. Pairs with the ACE S 250 pusher leg.
Each drill is sold on its own and pairs with an ACE pusher leg: RD 656 4W with the 62K, RD 16W with the 51K and S 250 with the S 250 leg.
The RD 656 4W is compatible with the Atlas Copco RH 656 4W.
The S215, S25 and S 250 take the same parts as the matching Seco drills.