ACE RB 133 D
Interchangeable with CP 133 rivet buster
An 8 inch stroke rivet buster with a D handle, built to the CP 133 pattern.
- Weight
- 13.6 kg
- Blows / min
- 1140
- Air use
- 21 l/s
- Air pressure
- 6.2 bar
ACE rivet busters cut rivets and bolts, break bridge decks and pile caps, and handle demolition where a full size breaker is too heavy.
They come in 4, 6, 8 and 11 inch strokes, with a pistol grip or D handle, and in jumbo or standard shank. Stepped cylinders stop the piston being ejected, and a teasing throttle gives fine control. The RH 4689 rivet hammers set rivets up to 30 mm.
Interchangeable with CP 133 rivet buster
An 8 inch stroke rivet buster with a D handle, built to the CP 133 pattern.
Interchangeable with CP 133 rivet buster
An 8 inch stroke rivet buster with a pistol grip, built to the CP 133 pattern.
Interchangeable with CP 1133
An 11 inch stroke rivet buster with a D handle, for the heaviest rivets and bolts.
Interchangeable with CP 1133
An 11 inch stroke rivet buster with a pistol grip, for the heaviest rivets and bolts.
Interchangeable with CP 4140
Our shortest rivet buster, a 4 inch stroke with a D handle and jumbo shank.
Interchangeable with CP 4140
Our shortest rivet buster, a 4 inch stroke with a pistol grip and jumbo shank.
Interchangeable with CP 4160
A 6 inch stroke rivet buster with a D handle and jumbo shank, for faster blows on smaller rivets.
Interchangeable with CP 4160
A 6 inch stroke rivet buster with a pistol grip and jumbo shank, for faster blows on smaller rivets.
Interchangeable with CP 4608 / TEX 14
An 8 inch stroke rivet buster with a D handle, built to the CP 4608 and TEX 14 pattern.
Interchangeable with CP 4608 / TEX 14
An 8 inch stroke rivet buster with a pistol grip and jumbo shank, built to the CP 4608 and TEX 14 pattern.
Interchangeable with CP 4611 / TEX 15
An 11 inch stroke rivet buster with a D handle and jumbo shank, built to the CP 4611 and TEX 15 pattern.
Interchangeable with CP 4611 / TEX 15
An 11 inch stroke rivet buster with a pistol grip and jumbo shank, built to the CP 4611 and TEX 15 pattern.
Interchangeable with CP 4689 rivet hammer
A rivet hammer for setting rivets up to 20 mm, with a D handle.
Interchangeable with CP 4689 rivet hammer
A rivet hammer for setting rivets up to 20 mm, with a pistol grip.
Interchangeable with CP 4689 rivet hammer
A rivet hammer for setting rivets up to 24 mm, with a D handle.
Interchangeable with CP 4689 rivet hammer
A rivet hammer for setting rivets up to 24 mm, with a pistol grip.
Interchangeable with CP 4689 rivet hammer
A rivet hammer for setting rivets up to 30 mm, with a D handle.
Interchangeable with CP 4689 rivet hammer
A rivet hammer for setting rivets up to 30 mm, with a pistol grip.
P models have a pistol grip for horizontal work. D models have a D handle for downward work.
4140 has a 4 inch stroke, 4160 has 6 inch, 4608 and 133 have 8 inch, 4611 and 1133 have 11 inch. A longer stroke gives a heavier blow.
This is the chisel shank the tool takes. Both fit CP 4608 and 4611 and Atlas Copco TEX 14 and 15 tooling.
The RH4689 rivet hammers set rivets up to 30 mm.