ACE RD 12D
Interchangeable with Atlas Copco RH 12D
A 9.8 kg D handle drill for short holes up to 1 m, including horizontal holes.
- Weight
- 9.8 kg
- Blows / min
- 2580
- Air use
- 24 l/s
- Air pressure
- 6 bar
ACE handheld rock drills, also called sinker drills, are for quarrying, construction and splitting stone.
ACE RD 12D9.8 kg · 2580 · 24 l/s
The range runs from the 9.8 kg RD 12D to the 25 kg RD 658, with air or water flushing, throttle control and a latch retainer for quick steel changes. Each model takes the same parts as an Atlas Copco drill, so it fits an existing fleet. We supply the drill steels, tapered rods, button bits and spares.
Interchangeable with Atlas Copco RH 12D
A 9.8 kg D handle drill for short holes up to 1 m, including horizontal holes.
Interchangeable with Atlas Copco RH 12T
An 11 kg T handle drill for downward holes of 24 to 34 mm up to 3 m.
Interchangeable with CP 32A
A 24.5 kg sinker drill built to the CP 32A pattern, for holes up to 44 mm and 3 m deep.
A 23 kg drill for 27 to 41 mm holes, used wet with water flushing or dry.
Interchangeable with Atlas Copco RH 571
An 18 kg sinker drill for 28 to 34 mm holes up to 6 m.
Interchangeable with Atlas Copco RH 658
A 25 kg sinker drill for 29 to 40 mm holes up to 6 m, used in quarries and open cut work.
Interchangeable with RH 658 5L
A 24 kg version of the RD 658 for 29 to 40 mm holes up to 6 m.
Sinker drills drill down from the surface, held by the operator.
RD 12D and RD 12T are light drills of 10 to 11 kg. RD 571 and RD 32 sit in the middle at 18 to 24 kg. The 25 kg RD 658 is the quarry drill, and takes the same parts as the Atlas Copco RH 658.
The RD 330 is water flushed for drilling underground.
Drill steels, bits and couplings are listed under mining accessories.