ACE PB 0112
Interchangeable with CP 0112
The lightest paving breaker, 13.5 kg. One person can hold it all day on thin slabs, floors and frozen ground.
- Weight
- 13.5 kg
- Blows / min
- 1620
- Air use
- 23 l/s
- Air pressure
- 6 bar
ACE paving breakers are pneumatic breakers for concrete, asphalt and hard ground, also called road breakers, concrete breakers or jackhammers. The range runs from the 13.5 kg PB 0112 to the 42 kg TPB 90.
Every model is machined from drop forged alloy steel, runs on a standard 6 bar compressor supply and takes standard hex shank chisels. Silenced, vibration reduced (SVR) versions are available for sites with noise or vibration limits. Each model is interchangeable with a Chicago Pneumatic, Atlas Copco or TOKU breaker, and we stock its chisels and spare parts.
Interchangeable with CP 0112
The lightest paving breaker, 13.5 kg. One person can hold it all day on thin slabs, floors and frozen ground.
Interchangeable with CP 117
A 36 kg breaker with a 165 mm stroke for heavy concrete and foundations.
The PB 117 with a latch retainer, so the chisel can be changed by hand in seconds.
A 35 kg breaker with a 186 mm stroke, the longest of our paving breakers.
Interchangeable with CP 1210
A 20 kg breaker that takes 25 × 108 mm hex chisels as standard for asphalt, light concrete and utility trench work.
Interchangeable with CP 1210 SVR
The PB 1210 with a silencer and a vibration damped handle, for sites with noise or hand arm vibration limits.
Interchangeable with CP 1230
A 29 kg breaker for general road and slab demolition, with a 32 mm shank and 140 mm stroke.
Interchangeable with CP 1240 / TEX P90
A 39 kg breaker with a 158 mm stroke for reinforced concrete and thick foundations.
Interchangeable with TOKU TPB 60
Built to the TOKU TPB 60 pattern and takes 28 x 152 mm TOKU chisels. A 30 kg breaker for general demolition.
Interchangeable with TOKU TPB 73
Built to the TOKU TPB 73 pattern. At 31 kg it is 1 kg heavier than the TPB 60, with a longer 144 mm stroke for harder hits.
Interchangeable with TOKU TPB 90
Built to the TOKU TPB 90 pattern. At 42 kg it is the heaviest TOKU pattern breaker we make.
The range runs from the 13.5 kg PB 0112 (30 lb class) to the 42 kg TPB 90 (90 lb class). A heavier breaker hits harder; a lighter one is easier to handle through a full shift.
Chisels are sold separately and must fit the shank on your breaker, for example 25×108 mm or 32×160 mm hex. Each model page lists its shank size.
SVR means silenced and vibration reduced. Latch type means a quick release chisel retainer. PB models take the same chisels and spares as Chicago Pneumatic and Atlas Copco breakers, and TPB models the same as TOKU breakers.
Every model runs on a normal 6 bar compressor supply.